⚠ If connected via Ethernet, connection will be lost — update your network adapter IP afterwards.
2
DiGiCo Connection
▼
⚙ Values to Enter in the DiGiCo Panel
Setup → External Control → Add Device → DiGiCo Pad. Copy each cell into the same-labeled column in DiGiCo.
Searching for console…
3
Session
▼
1 — New Session
Clears all profiles, aux buses, and channels. Console settings are kept.
2 — Scan Console
Make sure the Faderr13Box is connected to the DiGiCo console, then scan to retrieve channel and aux names automatically.
Profiles Backup
4
Call Announcement
▼
Connect — Musician QR
▼
Two scans get a musician in: 1 join the Wi-Fi, 2 open their mix. Edit the fields if musicians join a venue network or an external AP instead of the box's own Wi-Fi.
🔒 Box access point selected — its Wi-Fi credentials are fixed.
1 — Join the Wi-Fi
2 — Open your mix
Software Update
▼
Download the latest .f13upd file from faderr13.com, then drop it below. The signature is verified before any installation.
Nudge multiple channels together. Each channel can only belong to one group.
Talkback (Director Musical)
Enable Talkback (top, next to Aux Bus), then mark the talk mic with the t badge on a channel card below. Send levels are pre-set on the console; the app only switches sends on/off.
seconds (0 = unlimited)
Channels — Appearance & Order
▼
Drag to reorder · color & label apply globally · double-click to toggle active.
No channels yet. Add one manually or scan the console.
Aux Buses
▼
Names come from the console scan. Edit if needed, then save.
Talk Groups
▼
Named sets of aux destinations a talker can address (e.g. Backstage, VOX). Used by the Talkback page.
Aux Send Matrix — Read Only
Live Activity
Activation Required
This Faderr13Box is not activated. Enter the license key provided by Eighty6.
